Crystallization Kinetics of UHMWPE/PET Composite

سال انتشار: 1383
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,780

فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

NICEC09_185

تاریخ نمایه سازی: 14 فروردین 1386

چکیده مقاله:

Isothermal and nonisothermal crystallization kinetics of Ultra High Molecular Weight Polyethylene (UHMWPE) and its composite with 10 wt% Polyethylene Terephthalate (UHMWPE/10% PET composite) prepared with compression molding, were studied by differential scanning calorimetry. The Avrami equation was used to analyze the isothermal crystallization. Based on isothermal crystallization kinetics studies it was suggested that crystallization of UHMWPE proceeds via heterogeneous nucleation and is governed by two-dimensional growth. The crystallization rates of the composites were lower than those of the neat material, whereas their ultimate crystallinities were higher. For nonisothermal crystallization studies, Avrami equation, Ozawa theory and combination of the Avrami and Ozawa equation were used. The values of these models were very scattered, because the nonisothermal crystallization is a dynamic crystallization and it cannot be predicted by these equations. The trend of crystallization rate and ultimate degree of crystallinity for UHMWPE and UHMWPE/10% PET in nonisothermal condition were the same as isothermal crystallization.

کلیدواژه ها:

Ultra high molecular weight polyethylene (UHMWPE) ، Polyethylene terephthalate (PET) ، Crystallization Kinetics ، Avrami equation

نویسندگان

مصطفی رضایی

Polymer Engineering Group, Chemical Engineering Department, Engineering Faculty, Tarbiat Modarres University (TMU), ۴۸۳۸,Tehran, Iran

نادره گلشن ابراهیمی

Polymer Engineering Group, Chemical Engineering Department, Engineering Faculty, Tarbiat Modarres University (TMU), ,Tehran, Iran

Marianna Kontopoulou

Department of Chemical Engineering, Queen’s University, Kingston, Ontario, Canada K۷L ۳N۶

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Rudnik, E. and Dokowski, Z., Journal of Thermal Analysis, 49, ...
  • Ramakrishna, S., Mayer, J., Wintermantel, E., Leong, K.W., Composites Science ...
  • Schmalzried, T.P. and Callaghn, J.J., The Journal of Bone and ...
  • Deng, M. and Shalaby, S. W., Biomaterials, 18, 645, (1997). ...
  • Rezaei, M., Ebrahimi, N., European Polymer Journal, Submitted for review. ...
  • Jacobs, O., Mentz, N., Poppel, A. and Schulte, K., Wear, ...
  • Parasnis, N. _ and Ramni, K., Intern. Polymer Processing, XV, ...
  • Wu, J. J., Buckley, C. P. and OConnor, J. J., ...
  • Philips, R. A., Journal of Polymer Science, Part B: Polymer ...
  • Jordens, K. et al, Polymer, 41, 7175-7192, (2000). ...
  • Parasnis, N. _ and Ramani, K., Journal of Thermal Analysis ...
  • F. Chiu, Y. Peng and Q. Fu, Journal of polymer ...
  • A. Kumar, R. Gupta, Fundamentals of Polymers, (McGraw- Hill Companies, ...
  • M. Mandelkern, Crystallizatio n of polymers, (McGraw- Hill Companies, Inc. ...
  • Li, J. et al, Polymer Testing, 21, 583-589, (2002). ...
  • Ozawa, T., Polymer, 12, 150-158, (1971). ...
  • Gao, J. et al, Journal of Applied Polymer Science, 89, ...
  • Material X~ (%) T, (PC) _ _ _ UHMWPE 46.2 ...
  • _ 200 400 600 800 1000 1200 Time(s) ...
  • _ 500 1000 1500 2000 Time(s) ...
  • نمایش کامل مراجع