The Influence of Shear Rate on the Kinetics of Formation of Thermoplastic Polyurethane
محل انتشار: نهمین کنگره ملی مهندسی شیمی ایران
سال انتشار: 1383
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,653
فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NICEC09_179
تاریخ نمایه سازی: 14 فروردین 1386
چکیده مقاله:
In this paper the rheokinetics of polyurethane formation and the influence of shear rate on its kinetics have been studied. Two different linear polyurethane systems with 0% and 100% hard segments are examined in a cone and plate rheometer. The isothermal increase of viscosity during polyurethane formation has been measured at different shear rates and different temperatures and is modeled with an exponential function.
The molecular weight vs. time curves and the reaction kinetic constants have been obtained for various shear rates and temperatures using gel permeation chromatography (GPC). It was concluded that kinetics of polyurethane formation is enhanced as the shear rate is increased. Phase separation is found to be responsible for irregularities in the viscosity build up due to formation of polyurethane with hard segments at high conversions.
کلیدواژه ها:
نویسندگان
Navarchian
Department of Chemical Engineering, University of Isfahan, ۸۱۷۴۶-۷۳۴۴۱, Isfahan, Iran
Picchioni
Department of Chemical Engineering, University of Groningen, ۹۷۴۷AG, Groningen, The Netherlands
Janssen
Department of Chemical Engineering, University of Groningen, ۹۷۴۷AG, Groningen, The Netherlands
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :