Mechanical Properties of Polyester Resin Formed by Resin Transfer Moulding (RTM)
محل انتشار: نهمین کنگره ملی مهندسی شیمی ایران
سال انتشار: 1383
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,745
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NICEC09_153
تاریخ نمایه سازی: 14 فروردین 1386
چکیده مقاله:
Mechanical behaviour of polyester matrix formed by resin transfer moulding (RTM) has been studied to determine several important parameters, such as tensile and compressive/strain responses, single edge-notch tensile (SENT) fracture toughness, fracture energy and flexural properties. Fracture toughness, KIC, and fracture energy, GIC, obtained for the polyester matrix lie between the typical values for epoxy resins and
polystyrene. From experimental strain failure of the polymer matrix, theoretical mode-I delamination fracture energy of a composite was found to give a value of GIC of » 600 J m-2, which agrees well with experimental values of propagation GIC for bidirectional composites.
کلیدواژه ها: