NUMERICAL SIMULATION OF COLD FLOW WATER DIESEL EMULSION SPRAY
محل انتشار: پانزدهمین کنفرانس سالانه مهندسی مکانیک
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,784
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME15_569
تاریخ نمایه سازی: 8 فروردین 1386
چکیده مقاله:
A numerical simulation is performed for spray injection into an initially quiescent air in a constant volume chamber, using OPENFOAM
software. The hybrid, Eulerian-Lagrangian formulation is used where the continuous-phase equations are written in an Eulerian form and the
governing equations for the discrete, spray parcels are considered in a Lagrangian framework. A compressible version of the k- ε model is used for turbulence modeling. The simulation of spray consists of several submodels, including the atomization model, the breakup model, and models for drag and gravitational forces. A case is numerically simulated and compared with experimental data, as well as others' numerical predictions. The present results are in good agreement with the experimental data. Effect of water addition to diesel fuel is studied in cold condition and some characteristics such as the spray structure and size distribution of droplet diameters are presented. Water addition appears to have little
effects on the spray tip penetration, but changes the size of droplets.
کلیدواژه ها:
نویسندگان
Emami
Assistant Prof., Isfahan University of Technology Isfahan, Iran
Kheradmand
PhD student, Isfahan University of Technology Isfahan, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :