Mechanism of Porosity Formation in Ti6Al4V Alloy Weldment
محل انتشار: چهاردهمین کنفرانس سالانه مهندسی مکانیک
سال انتشار: 1385
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,989
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME14_551
تاریخ نمایه سازی: 1 فروردین 1386
چکیده مقاله:
In the present investigation, mechanism of porosity formation in Ti6Al4V alloy weldmenthas been studied. Welding procedure performed by using of microplasma arc welding (MPAW) process at different current and welding speed. Metallographic characterization was carried out by light microscopy and scanning electron microscopy (SEM).
Metallographic characterization has shown that porosity occurs in FZ. This could be due to mechanism of the hydrogen rejection that already present in the starting base metal. Pore nucleation can be homogenous or heterogenous. Calculations have shown that homogenous nucleation is not feasible mechanism for hydrogen pore creation in this alloy.
کلیدواژه ها:
Ti6Al4V alloy - Fusion zone - Heat affected zone - Microplasma arc welding – Porosity
نویسندگان
Fathallah Karimzadeh
Assistant Professor, Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran