INVESTIGATION OF BUCKLING DISTORTION IN WELDING OF A THIN WALL ALUMINUM BUTT JOINT
محل انتشار: چهاردهمین کنفرانس سالانه مهندسی مکانیک
سال انتشار: 1385
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,145
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME14_485
تاریخ نمایه سازی: 1 فروردین 1386
چکیده مقاله:
In this paper, global welding buckling distortion of a thin wall aluminum butt joint is investigated. To determine longitudinal residual stresses, a thermo-elastoplastic model is employed; analysis of thermal model and elastic-viscoplastic (Anand) model are decoupled. By using birth and death element method and time dependent model, molten puddle motion (speed of welding) is modeled. Three dimensional nonlinear-transient heat flow analysis has been used to obtain temperature distribution. By applying thermal results and using three dimensional Anand elastic-viscoplastic model, stress and deformation distributions are obtained. Residual stresses are applied on a structural model and by using eigenvalue methods, global buckling instability of butt welded joint is determined. The result of buckling investigation in the numerical model is compared with the result of an experiment.
کلیدواژه ها:
نویسندگان
Asle Zaeem
M.Sc. Student, Department of Mechanical Engineering, Engineering School, Shiraz University, Shiraz, Iran
Nami
Assistant Professor, Department of Mechanical Engineering, Engineering School, Shiraz University, Shiraz, Iran
Kadivar
Professor, Department of Mechanical Engineering, Engineering School, Shiraz University, Shiraz, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :