Laboratory investigation of three-dimensional flow structure and local scour mechanisms around a novel spur dike with regular volumetric porosity (Chine blocks)

سال انتشار: 1405
نوع سند: مقاله ژورنالی
زبان: فارسی
مشاهده: 23

فایل این مقاله در 29 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_NAWEE-5-4_002

تاریخ نمایه سازی: 22 آبان 1405

چکیده مقاله:

Objective: To experimentally assess how regular, connected three-dimensional volumetric porosity modifies the hydrodynamic and morphodynamic response of a spur dike, and to compare a fully porous modular Chine dike and a three-row hybrid porous-shell configuration (۳RC) with a conventional impermeable spur dike under submerged and non-submerged conditions. Materials and Methods: Experiments were conducted in a ۶.۰ m long, ۰.۶۰ m wide recirculating flume at a flow depth of ۰.۱۵ m and discharge of ۲۵.۷ L/s. The approach flow was subcritical (U = ۰.۲۸۶ m/s, Fr approximately ۰.۲۳) and near the clear-water threshold (U/Uc = ۰.۹۶) over uniform non-cohesive sand with d۵۰ = ۱.۲ mm. All dikes had a transverse length of ۰.۱۲ m. The Chine configuration was assembled from ۲ x ۲ x ۲ cm cubic blocks with connected openings and a geometric volumetric porosity of approximately ۰.۲۵. Three-component velocities were measured using a Nortek Vectrino II ADV at ۵۰ Hz for ۱۲۰ s at each sampling node. Velocity records were despiked and filtered using correlation and SNR criteria. Each scour test continued for ۲۴ h, and equilibrium bed topography was surveyed on a ۱ x ۱ cm grid with a laser profiler; dye and yarn tracers supported interpretation of the measured flow structures. Results and Discussion: Regular volumetric porosity produced a controlled bleed flow through the dike body, relieved upstream stagnation pressure, weakened near-bed downflow, and reduced the concentration of high-vorticity cores near the structure. Under submerged conditions, porous configurations reduced peak near-bed downflow by about ۵۰% relative to the solid case, while the fully porous Chine reduced peak vorticity at the dike by about ۸۴%. Maximum equilibrium scour depth decreased from ۹.۳ cm for the solid dike to ۷.۱ cm for the fully porous Chine under submerged flow (۲۳.۷% reduction) and from ۱۲.۳ to ۹.۵ cm under non-submerged flow (۲۲.۸% reduction). The fully porous configuration also reduced scour-hole width and longitudinal extent and shifted the submerged deposition-bar onset from ۲۳.۲ to ۱۴.۹۵ cm, ۳۵.۶% closer to the structure. The ۳RC case showed intermediate hydraulic and morphodynamic behavior. Conclusion: A regular, hydraulically connected three-dimensional pore network can redistribute momentum through the structure, weaken coherent near-bed erosive motions, and reduce both scour depth and scour-hole extent. Within the tested conditions, the fully porous Chine configuration provided the most consistent scour mitigation, indicating that pore-network topology, in addition to overall permeability, is an important design variable for permeable river-training structures.

نویسندگان

مصطفی صابری فر

Department of Civil Engineering, Faculty of Engineering, Behbahan Khatam Alanbia University of Technology, Behbahan, Iran

سید امین اصغری پری

civil engineering, Faculty of Technology and Engineering, Behbahan Khatam Alnabia Technology University