FINITE ELEMENT mODELING OF POLYPROPYLENE FOAM UNDER IMP[ACT LOADING
محل انتشار: سیزدهمین کنفرانس سالانه مهندسی مکانیک
سال انتشار: 1384
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,101
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME13_641
تاریخ نمایه سازی: 21 اسفند 1385
چکیده مقاله:
Indentation test of a hemisphere to a foam block has been simulated with ABAQUS/Explicit and the numerical results have been compared with the experimental ones. Both volumetric and isotropic hardening was used for simulation. Relatively good agreement was achieved between isotropic hardening model and the experimental results. However, the model should be modified in order to take into account elastic recession
during the unloading phase. In contrast, volumetric hardening model predict that the foam block tear down in early stage of impact. A phenomenon which is neither observed nor reported in real test results.
کلیدواژه ها:
ABAQUS/Explicit - Foam - Impact
نویسندگان
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :