DROP-IMPACT ANALYSIS OF TV MODEL AND THE EFFECT OF SOME DESIGN PARAMETERS ON ITS ELECTRONIC COMPONENTS
محل انتشار: سیزدهمین کنفرانس سالانه مهندسی مکانیک
سال انتشار: 1384
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,906
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME13_629
تاریخ نمایه سازی: 21 اسفند 1385
چکیده مقاله:
Modeling the transient drop analysis for a TV in protective crushable foams is considered in this work. The modeling process of different parts and important issues related to them is described in details. Next, the analysis was focused on the effect of two important parameters, namely foam thickness and foam density, on the maximum stress of the TV shell and the board chip. The analysis showed that increasing the foam thickness could protect the TV set from damage. However, this effect is noticeable up to a certain level and after that is not economical. The results also indicated that decreasing the foam density could reduce the maximum stress on TV set by absorbing more energy during impact.
کلیدواژه ها:
Drop/impact analysis – Impact simulation – Crushable foam
نویسندگان
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :