Numerical Investigation on Transient Heat Transfer of Different Coolants in the Cooling Channel of a Thrust Chamber

Controlling the nozzle wall temperature using regenerative cooling is a highly effective approach in liquid rocket engines. The selection of coolant is critical to determining the cooling system's thermal performance. In this study, the transient and steady-state heat transfer characteristics of a regenerative cooling channel are numerically investigated using two benchmark coolants, water and Ethyl-alcohol, under different coolant mass flow rates. A two-dimensional axisymmetric conjugate heat transfer model is employed, in which the thrust chamber, cooling channel, and solid walls are fully coupled. For both coolants, the maximum gas-side wall temperature occurs upstream of the nozzle throat, and increasing the coolant mass flow rate significantly reduces both gas-side and coolant-side wall temperatures throughout the thrust chamber. Specifically, for water, the maximum wall temperature decreases from ۶۵۷ K to ۵۴۱ K as the mass flow rate increases from ۰.۵ to ۱.۵ kg/s, whereas for Ethyl-alcohol, it decreases from ۹۵۷ K to ۶۹۳ K. The time required to reach steady-state conditions for Ethyl-alcohol is approximately ۱.۸ times longer than that of water, while reducing the coolant mass flow rate from ۱.۰ to ۰.۵ kg/s nearly doubles the steady-state time. Moreover, the coolant mass flow rate strongly influences the peak heat flux and convective heat transfer coefficient upstream of the throat. Increasing the mass flow rate enhances heat transfer, so that at ۱.۵ kg/s the maximum heat flux is ۲۱.۰ MW/m² for water and ۱۹.۷ MW/m² for Ethyl-alcohol. Correspondingly, the convective heat transfer coefficient attains a peak value of approximately ۷.۸ kW/m²·K near the throat and increases with increasing coolant mass flow rate. The results provide quantitative insights into transient thermal behavior and heat transfer mechanisms in regenerative cooling channels, offering helpful guidance for the thermal design and optimization of rocket engine thrust chambers.

کلیدواژه ها:

Cooling channel ، wall temperature ، Coolant ، Heat flux ، convective heat transfer