Material Flow in Rotary Drums
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 27، شماره: 6
سال انتشار: 1393
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 852
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-27-6_002
تاریخ نمایه سازی: 17 خرداد 1393
چکیده مقاله:
The experimental investigation of material flow in non-flight rotary drums is studied in a pilot scale apparatus. Contrary to the other published references that have used granular materials, the novelty ofthis work is that fine particles were used in the experiments. The objective of the paper is to declare theerrors of steady-state model of material flow in such devices. The operating conditions during experiments were conducted in the range of slumping, rolling and cascading regimes of material flowinside rotary drums. To keep with such conditions the rotation speed, axis inclination and feeding flowrate were considered within the range of 3.33 to 7.00 (rpm), 0.00 to 3.00 (deg.) and 6.80 to 13.60 (g/s), respectively in a drum of 14 cm diameter.The obtained experimental data reveals that the model does not describe well the material flow in feeding zone as well as in the discharge zone. However, it is reasonably well for application in the intermediate sections.
کلیدواژه ها:
نویسندگان
m.r yousefi
Department of Chemical Engineering, Iran University of Science & Technology, ResaltCircle, Tehran, Iran
m shirvani
Department of Chemical Engineering, Iran University of Science & Technology, ResaltCircle, Tehran, Iran