DESIGN OPTIMIZATION AND FABRICATION OF A 14KW BRUSHLESS DC MOTOR FOR LOW SPEED APPLICATION
محل انتشار: کنفرانس ملی مهندسی مکانیک ایران
سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 890
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NCMII01_445
تاریخ نمایه سازی: 22 اردیبهشت 1393
چکیده مقاله:
. In this paper, design optimization and fabrication of a direct drive 14kW Brushless DC motor for propulsion system has been considered. The main challenge of low speed brushless dc motor is pulsating torque due to cogging torque and torque ripple components which causes noise and vibration. In order to reduce pulsating torque components, the effect of slot skewing and dummy slots has been investigated using finite element method. Optimization results show that simultaneous utilization of these two methods has a significant effect on pulsating torque reduction.
کلیدواژه ها:
نویسندگان
Ali Jabbari
Asistant Professor, Department of Mechanical Engineering, Faculty of Engineering, Arak University, Arak ۳۸۱۵۶-۸-۸۸۴۹, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :