Comparative experimental analysis and correlation development for pressure drop in vertical helical tubes with non-boiling air/water two-phase flow in both upward and downward directions
سال انتشار: 1404
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 30
فایل این مقاله در 20 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_EES-13-2_005
تاریخ نمایه سازی: 8 شهریور 1404
چکیده مقاله:
Helical tubes are very efficient and stable in managing two-phase flows, thanks to their tightly coiled structure. Additionally, their thermal performance is commendable. Expanding our understanding of the thermal and entropic properties of two-phase flows in helical tubes is of the utmost importance due to the widespread use of these flows in many applications. This study intends to conduct experimental investigations into the hydrodynamic properties of helical tubes. The research included putting various sized coil tubes through their paces using a two-phase air/water flow. A vertical helical tube with coils of varied diameters was used to achieve this objective. After being properly mixed in a mixing chamber, the water and air are sent into the helical pipe, where they flow downward and upward. This study primarily examines the impact of lowering pressure. The major emphasis of this study is to use multiple linear regression to assess the gathered experimental data and generate a correlation for pressure loss. In downhill flow, the findings show that a smaller coil diameter leads to a lower pressure drop, but in upward flow, the opposite is true. The minimum value of pressure drop is ۱۷۰.۷۵ and ۱۳۳.۴۵ for upward and downhill flow respectively. In addition, in a downhill flow, the maximum pressure drop ratio is around ۱.۲۵, while in an upward flow, it is ۱.۶۳.
کلیدواژه ها:
نویسندگان
Ayat Sabatsany
Department of Mechanical Engineering, Tabriz Branch,Islamic Azad University, Tabriz, Iran
Rogayyeh Motallebzadeh
Department of Mechanical Engineering, Tabriz Branch,Islamic Azad University, Tabriz, Iran
Samad Jafarmadar
Department of Mechanical Engineering, Faculty of Engineering, Urmia University, Urmia, Iran
Abdolsalam Ebrahimpour
Department of Mechanical Engineering, Tabriz Branch,Islamic Azad University, Tabriz, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :