Experimental Investigation of Explosive/impact Welding-Experiments with a Gas Gun
محل انتشار: پنجمین کنفرانس ملی مهندسی ساخت و تولید
سال انتشار: 1381
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 831
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME05_006
تاریخ نمایه سازی: 4 اسفند 1392
چکیده مقاله:
This paper describesan experimentalstudy of impactwelding using a gas gun. Thestudy was part of a more comprehensiveprogrammeto model the process of explosive welding.The gun enabled similar impactconditionsto those in explosiveweldingto be realisedmore economicallyand more quicklytherebyallowinga wider rangeof impactangles and velocitiesto be tested. Small flyer plates (40 x 40 x 3mm) of copper,titanium, stainless steel and zirconium were welded to mild steel by firing them at inclined targets at speeds of up to 10000/s. The tests were used to construct a welding window of impact velocity versus impact angle for stainless steel to steel and titanium to steel. Visual inspection of sections of the weld showed the same types of wavy interface as observed in explosive welding of the same materials. The data collected was used to validate a computer simulation of the impacting plates
کلیدواژه ها:
Explosive/Impact Welding-Wave Formation-Bonding-Gas gun Vortices
نویسندگان
ali asghar Akbari mousavi
Dept. of Mechanical Engineering, Iran University of Science and Technology Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :