Modeling of fluidized bed dryers in bubble regime on basis of exergy analysis
محل انتشار: دهمین کنگره ملی مهندسی شیمی ایران
سال انتشار: 1384
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,438
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NICEC10_171
تاریخ نمایه سازی: 6 بهمن 1385
چکیده مقاله:
Fluidized bed drying is a frequent method for drying of moist particles. This method improves heat and mass transfer coefficients considerably. In this article, exergy analysis of fluidized bed dryer in bubble regime was established and developed. The exergy efficiency has been introduced as main criteria for optimizing the operation conditions and also the effects of different parameters as drying time, particle moisture content, air mass flow rate and air velocity on exergy efficiency, were been investigated.
کلیدواژه ها:
نویسندگان
Semnani Rahbar
Chemical Engineering Dept., Engineering faculty, Imam Hussein University
Yazdanpanah
National petrochemical company
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :