Pulsed Nd-YAG laser surface melting of AZ91 pre-sprayed with WC- Co

سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,146

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

IMES07_381

تاریخ نمایه سازی: 28 آذر 1392

چکیده مقاله:

AZ91 magnesium alloy pre- sprayed with WC-5 wt% Co powder was surface melted by pulsed Nd-YAG laser. Microstructure, chemical composition and phase analyses of the treated layers were studied by utilizing scanning electron microscope (SEM) equipped with energy dispersive spectroscopy (EDS), X-ray diffractometry and micro-hardness machine. Laser treated layers showed much finer structure compared to the original base material with fine distribution of WC particles. Different intermetallic compounds were detected in the fabricated layers and the hardness of treated surfaces was substantially higher than that of the base material

کلیدواژه ها:

نویسندگان

B Mehrjou

School of Metallurgy and Materials Engineering, University of Tehran, Tehran, P.O. Box۱۱۱۵۵-۴۵۶۳, Iran

M. Heydarzadeh Sohi

School of Metallurgy and Materials Engineering, University of Tehran, Tehran, P.O. Box۱۱۱۵۵-۴۵۶۳, Iran

R Soltani

School of Metallurgy and Materials Engineering, University of Tehran, Tehran, P.O. Box۱۱۱۵۵-۴۵۶۳, Iran

M.J Torkamany

Engineering Faculty, Metallurgical Group, University of Tarbiat Modarres, Tehran, P.O. Box ۱۴۱۱۵-۱۴۳, Iran