Fuzzy corrosion modeling, new horizons, new oportunities
سال انتشار: 1385
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,233
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
این مقاله در بخشهای موضوعی زیر دسته بندی شده است:
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
SCCE06_159
تاریخ نمایه سازی: 18 دی 1385
چکیده مقاله:
Corrosion in the petroleum industry is one the major concerns of the managers and engineers. The total annual cost of corrosion in the oil and gas production industry is estimated to be $1.372 billion. To remain competitive with the world market, this cost must be kept to a minimum and here the large demands for a reliable corrosion prediction model do exist. On the other hand in many engineering problems the available information is vague and sometimes measured data or export knowledge is too imprecise to justify the use numbers. Fuzzy logic is a good solution here and helps us to compute with words. Using fuzzy logic as a powerful and marvelous tool, 3-D corrosion models have been generated as the purpose of this research. Pressure, temperature, oil and gas production rate, CO2 and H2S content of the flow are the model inputs and the corrosion rate is the output. Corrosion rate can be obtained only having 2 parameters of the model input. These graphs can be used as a powerful tool in corrosion prediction by managers and engineers.
کلیدواژه ها:
نویسندگان
یاسین حاجی زاده
Islamic Azad Uni of Tabriz. Young researchers club