Effects of DC plasma nitriding parameters on properties of DIN 1.2344 low alloy steel

سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,464

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

NICGH02_076

تاریخ نمایه سازی: 25 شهریور 1392

چکیده مقاله:

The aim of this paper is optimizing of parameters can be affected to depth of nitrided layer for improving the corrosion resistance of DIN 1.2344 low alloy steel by plasma nitriding.In this study, DIN 1.2344 low alloy steel samples were plasma nitrided at 3 level temperatures (450, 500 and 550℃), 3 level time (2, 4, 6 hour) and in 2 level gas compositions (25%N2-75%H2 and 75%N2-25%H2). Diffusion zone was determined by optical microscopy. Phases formed in these layers were studied by X-ray diffraction method. The XRD pattern reveals that all specimens consist Fe3N, Fe2N and Cr2N phases.Results have shown that depth of diffusion zone increases byincreasing gas compositions from 25% N2 to 75% N2. In addition, thickness of this layer have increased by increasing temperature from 450℃ to 550℃, but It seems that by increasing nitriding time of 2 to 4 hour the depth of the white layer increased but by increasing to 6 hour the depth of this layer decreased sligthly. The optimun condition for plasma nitriding of DIN 1.2344 is 550℃, 4h and 75% N2.

کلیدواژه ها:

نویسندگان

H. Khorsand

Material Division, Faculty of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, Iran

H. Aghajani

Department of Materials Engineering, Faculty of Mechanical Engineering, University of Tabriz, Tabriz, Iran

N. Mohamadian

Material Division, Faculty of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, Iran

A. Akrami

School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Q.F. Peng., "Improving abrasive wear by surface treatment", Wear, Vol. ...
  • U.Huchel, S.Bramers, J. Crummenauer, S.Dressler, S.Kinkel., "Single cycle combination layers ...
  • surface treatment Plasma:ه [3] C.V.Franco, F .G.Mittelstadt, J.L.R.Muzart, A.R.Souza, C.P. ...
  • K.T.Rie., :Recent advance in plasma diffusion process, Surf. Coat. Technol., ...
  • Edenhofer B., -Heat treatment of metals", part 2, pp. 59-67, ...
  • Kovacs.W, Russell.W, ;Ion Nitriding", Metals Park, pp. 9-17, 1987. ...
  • Bell T., :Heat treating", ASM International, ASM handbook vol 4, ...
  • Yun-taoXi , Dao-xin Liu, Dong Han., "Improvement of corrosion and ...
  • D.C.Wen., _ :Micros tructure and corrosion resistance of the layers ...
  • T. Michler, M. Grischke, K. Bewilogua, H. Dimigen. ;:Properties of ...
  • Edenhofer.B, Bewley.T.J., "Heat Treatment", The Metals Society, Vol. 76, pp. ...
  • نمایش کامل مراجع