Bolted Transverse Stiffeners for Slender Web Plate Girder Bridges

سال انتشار: 1382
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,269

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

SEE04_SS14

تاریخ نمایه سازی: 10 آبان 1384

چکیده مقاله:

Web of plate girders in bridges are usually reinforced by transverse welded stiffeners in order to improve their shear capacity. Due to problems associated with field welding and fatigue, welded stiffeners are not suitable for seismic retrofit of existing bridges. Bolted stiffeners are a practical alternative for strengthening girders that are expected to experience shear stresses in excess of their design shear capacity. These stiffeners are far more suitable than welded stiffeners because field welding would not be required for their installation.The design requirements in various building and bridges specifications are based on experimental and analytical studies of plate girders with welded transverse stiffeners. Such requirements may not entirely applicable for plate girders with bolted stiffeners. This report presents results of an analytical study about shear strength and behavior of plate girder whose web is reinforced by bolted transverse stiffeners. The current design requirements are also evaluated for such girders

نویسندگان

Akbar Vasseghi

Assistant Professor, IIEES, Tehran, I.R. Iran,

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • A. Vasseghi, A. Shrizadeh, *Utilizing Transverse Bolted Stiffeners for Plate ...
  • Basler, K., *Strength of Plate Girders in Shear', Trans. ASCE, ...
  • _ Specification for Highway Bridges , 16th ed., American Association ...
  • _ and Resistance Factor Design Specification for Structural Steel Buildings?, ...
  • Vasseghi, A., Frank, K. H., 4Static Shear and Bending Strength ...
  • Vasseghi, A., *Strength and Behavior of Composite Plate Girder under ...
  • Johnston, B. G., _ Stability Design Criteria for Metal Structures?, ...
  • Criteria for Load and Resistance Design of Steel Bridges', AISI, ...
  • نمایش کامل مراجع