Microstructure and charpy impact energy of aluminum based composites reinforced with 20% sio2 particles in friction stir welding
محل انتشار: دومین کنفرانس بین المللی آلومینیوم
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,346
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIAC02_052
تاریخ نمایه سازی: 12 اردیبهشت 1392
چکیده مقاله:
Friction stir welding (FSW) is a fairly recent technique that utilizes a non-consumable rotating welding tool to generate frictional heat and plastic deformation at the welding location, thereby affecting the formation of a joint while the material is in the solid state. The aim of the present research is to investigate the effect of friction stir welding processes on the microstructure and impact toughness of the aluminium composited reinforced with 20% sio2. Because of the severe deformation during this process the size of both reinforced particles and aluminium grain are affected. The result of impact test shows that the total energy is increased in the friction stir welding composites comparing with the base material.
کلیدواژه ها:
نویسندگان
Afshin habibi eftekhar
Department of Metallurgy, Behbahan Branch, Islamic Azad University, Behbahan, Iran
Asghar habibi eftekhar
Department of Metallurgy, Behbahan Branch, Islamic Azad University, Behbahan, Iran
fr. hedayat
Department of Metallurgy, Behbahan Branch, Islamic Azad University, Behbahan, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :