Investigation of the Efficacy of Damp-Proof Montmorillonite Nanoclay for Radon Reduction Strategies in Radon Prone Areas of Ramsar

سال انتشار: 1392
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 43

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JBPE-3-1_005

تاریخ نمایه سازی: 3 بهمن 1402

چکیده مقاله:

Background: Ramsar, a northern city in Iran, lies on the coast of the Caspian Sea. This city has areas with some of the highest levels of natural radiation measured to date. The radon concentration in some areas of Ramsar is up to ۳۷۰۰ Bq m–۳. On the other hand, due to high level of humidity, damp-proof barriers should be used in construction of new buildings in radon prone areas of this city. Montmorillonite clays can be used as both moisture-proof and radon-proof agents. This study was an attempt to investigate the radon-proof properties of montmorillonite nanoclay in construction of new buildings in radon prone areas.Methods and Results: Although soaked nanoclay samples could not reduce the radon level, when wet nano-montmorillonite was used, mean radon level inside the house was ۱۰۸۲.۴ ± ۵.۹ Bq/m۳ (ranged ۸۲۶.۳ – ۱۱.۴۰.۵ Bq/m۳) while removing nano-montmorillonite sheet increased the radon level to ۱۱۴۶.۵ ± ۶.۲ Bq/m۳. The high moisture in the soil of these areas, makes the nano-montmorillonite wet and converts it to a good radon-proof sheet.Conclusion: It is worth mentioning that the nano-montmorillonite clay used in this study is not supposed to replace radon-barrier (membrane) sheets but when used with proper membranes can enhance the efficiency of radon mitigation systems.

کلیدواژه ها:

نویسندگان

S. M. J. Mortazavi

Professor of Medical Physics, Department of Medical Physics and Medical Engineering, School of Medicine, Shiraz University of Medical Sciences, Shiraz, Iran.

F. Jamali

Master Student, Student Research Committee, School of Medicine, Shiraz University of Medical Sciences, Shiraz, Iran.

J. Moradgholi

Ph.D student of nanomaterials, Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran.

A. R. Mehdizadeh

Assistant Professor of Medical Physics, Department of Medical Physics and Medical Engineering, School of Medicine, Shiraz University of Medical Sciences, Shiraz, Iran.

R. Faghihi

Radiation Research Center, Mechanical Engineering School, Shiraz University, Shiraz, Iran.

S. Mehdizadeh

Radiation Research Center, Mechanical Engineering School, Shiraz University, Shiraz, Iran.

M. Haghani

The Center for Radiological Research, Shiraz University of Medical Sciences, Shiraz, Iran.

M. Saieedi

Radiation Research Center, Mechanical Engineering School, Shiraz University, Shiraz, Iran.

S. A. Mortazavi

Urban Designing Department, Islamic Azad University (Beiza Branch), Fars, Iran.

M. R. Ghanbar-pour

Radiation Research Center, Mechanical Engineering School, Shiraz University, Shiraz, Iran.