Monitoring Autocorrelated Reliability Data in Multistage Processes
محل انتشار: نهمین کنفرانس بین المللی مهندسی صنایع
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,169
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIEC09_153
تاریخ نمایه سازی: 26 اسفند 1391
چکیده مقاله:
In this paper, multistage process monitoring with the purpose of improving the product reliability is addressed. To this end, the process output is usually inspected under specific loadconditions and the tensile strength of reliability-related quality characteristic is measured. However, in some cases, theobservations from the process output are autocorrelated. This makes the use of existing monitoring procedures futile.Therefore, the proportional hazards (PH) models have been modified to effectively justify the effect of cascade property in line with the autocorrelation issue and three monitoring schemesare devised. The problem of unobserved heterogeneity is discussed as well. The simulation-based study is conducted toinvestigate the performance of the proposed control charts. Theresults reveal that the cumulative sum control chart is superior in that it can detect shifts much faster. Finally, the impact of ignoring autocorrelation has been studied which confirms the significant effect of autocorrelation on the performance of the process control
کلیدواژه ها:
نویسندگان
Shervin Asadzadeh
Corresponding Author, PhD Student
Abdollah Aghaie
Professor Department of Industrial Engineering, Sharif University of Technology, Tehran, Iran
Seyed Taghi Akhavan Niaki
Professor,
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :