MODELING OF ASPHALTENE DEPOSITION IN PIPELINES
محل انتشار: مجله علوم و فن آوری نفت، دوره: 3، شماره: 2
سال انتشار: 1392
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 58
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JPSTR-3-2_003
تاریخ نمایه سازی: 29 آذر 1402
چکیده مقاله:
This paper is concerned with asphaltene deposition in fluid flowing through pipelines. Brownian diffusion and drag, gravitational, thermophoresis, buoyancy, and shear removal are considered as possible mechanisms in the asphaltene deposition process. The thermo-physical properties of the fluid were obtained from Iranian oil fields. A model was used in the pipeline deposition modeling to predict the asphaltene deposition rates under flow conditions. The effects of particle size, temperature gradient, and fluid velocity were studied on asphaltene deposition rate. The results showed that, among the above-mentioned mechanisms, the gravitational and thermophoresis forces played a significant role in the formation of the deposit under the flow conditions. To verify the model, some predictions were compared with the available aerosol deposition data in the literature.
کلیدواژه ها:
نویسندگان
Behruz Mirzayi
chemical engineering of department university of Mohaghegh Ardebili
Mohammad Behruz Chakan
chemical engineering of department university of Mohaghegh Ardebili
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :