Experimental Investigation of Air Pressure Drop Variations on Cooling Performance in Engine Radiators
سال انتشار: 1402
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 114
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ASAS-1-4_005
تاریخ نمایه سازی: 28 آذر 1402
چکیده مقاله:
Radiators are among the essential parts of car engines, and any weakness or defect in them can cause severe damageto the engine. The most critical tasks of radiators is effective heat transfer between air and fluid inside the radiatortubes, which is done by fans. Since the air temperature has a direct relationship with its pressure, measuring the airpressure before and after the radiator is necessary. In this research, three different methods have been used to calculate the air pressure drop at speeds of ۳, ۵, and ۸ m/s. The purpose of this work is to introduce the best possiblemethod to reduce the risks that are caused by the wrong reading of the air pressure drop using the accuracy of theobtained results, The point that each part of the radiator is determined by which pressure (static or dynamic pressure)is crucial and plays an essential role for choosing better type of pressure gauge. If this is done, the obtained resultswill be correct. If the air pressure drop is not calculated correctly, it can cause severe damage to the engine and othercar parts. The best method that has the slightest error and the least risk for car radiators is when the pressure gaugecalculates the static pressure inside the wind tunnel and the dynamic pressure outside the wind tunnel. In this case,the error of the obtained results comparing to the standard results is ۹.۱۶, ۱۵.۴۱ and ۱۰.۱۸%, at speeds of ۳, ۵ and ۸ .
کلیدواژه ها:
car radiator ، engine cooling ، air pressure drop ، cooling water system ، Air pressure drop measurement method
نویسندگان
majid nouri
Department of Vehicle Engineering, Faculty of Technology and Engineering, Standard Research Institute, Alborz, Iran
milad Ramezankhani
Master of Mechanical Engineering, Iran University of Science and Technology
Mohsen Katani Shooshtari
Standard Research Institute expert