Fabrication and Characterization of Polymer Blend Membranes for CO۲/CH۴ Separation
محل انتشار: مجله تکنولوژی گاز، دوره: 1، شماره: 1
سال انتشار: 1395
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 94
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JGT-1-1_002
تاریخ نمایه سازی: 29 آبان 1402
چکیده مقاله:
In the last two decades, various modifying techniques have been employed to improve membranes performance including mixed matrix, cross linking, grafting, polymer blending, making composite or hybrid membrane. Blending of polymeric membrane is a cost and time effective approach and an advanced technique for gas separation, where two or more polymers are mixed to produce a new material with different and desired physical, chemical and mechanical properties. This work reports on the separation performance of a novel polymeric blend membrane based on poly (amide-b-ethylene oxide) and polyethersulfone blends. These flat sheet membranes were synthesized using solution-casting in different ratios (۱۰-۴۰%) in order to improve membrane separation performance of CO۲/CH۴ gas mixtures. Prepared membranes were then characterized by Fourier Transformed Infra-Red Spectroscopy (FTIR) where spectral changes indicated existence of molecular interaction among the polymeric blends, highlighting their compatible nature. Permeabilities of pure gases (CO۲ and CH۴) were also examined at room temperature. Results indicated that increasing wt.% PES in the Pebax®/PES blend membranes increased selectivity of CO۲/CH۴ and decreased pure gas permeabilities.
کلیدواژه ها:
نویسندگان
Samira Mosleh
Department of Chemical Engineering, Faculty of Engineering, University of Kashan, Kashan, Iran
Mohammadreza Mozdianfard
Department of Chemical Engineering, Faculty of Engineering, University of Kashan, Kashan, Iran
Mahmoud Hemmati
Chemical, Polymeric and Petrochemical Technology Development Research Division, Research Institute of Petroleum Industry (RIPI), Tehran, Iran
Ghader Khanbabaei
Chemical, Polymeric and Petrochemical Technology Development Research Division, Research Institute of Petroleum Industry (RIPI), Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :