Investigation of Unbalanced Magnetic Force in Permanent Magnet Brushless DC Machines with Diametrically Asymmetric Winding
سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 59
فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JOAPE-6-2_010
تاریخ نمایه سازی: 13 آبان 1402
چکیده مقاله:
The purpose of this paper is the calculation of Unbalanced Magnetic Force (UMF) in permanent magnet brushless DC (PMBLDC) machines with diametrically asymmetric winding and investigation of UMF variations in the presence of phase advance angle. This paper presents an analytical model of UMF in surface mounted PMBLDC machines that have a fractional ratio of slot number to pole number. This model is according to a ۲-D analytical field model. By an appropriate choice for slot number to the pole number ratio, the magnitude of UMF is zero and this is achieved only when the stator slot and coils distribution are symmetrical about the diameter of the machine. The presented model is validated by ۲-D finite element analysis and a good agreement is obtained between them. Also, UMF is calculated in the presence of different phase advance angles. UMF was calculated for ۳۳-slot/۳۴-pole and ۳۶-slot/۳۴-pole external rotor machines with analytical and finite element method. A machine with ۳۳-slot/۳۴-pole has significantly larger UMF than the ۳۶-slot/۳۴-pole machine. Also, UMF is calculated for the ۳۳-slot/۳۴-pole machine in the presence of phase advanced angles and results show that the magnitude of UMF changes with the amount of phase advance angle periodically. The impact of phase advance angle method on the magnitude of UMF is investigated for the first time by finite element method. Due to increasing or decreasing of the magnitude of UMF in the presence of different phase advance angles, the magnitude of UMF is an important feature in the selection of appropriate phase advance angle.
کلیدواژه ها:
Permanent magnet brushless DC machines ، pole and slot number combination ، asymmetric winding ، unbalanced magnetic force ، phase advance angle
نویسندگان
M. Jafarboland
Department of Electroceramics and Electrical Engineering, University of Malek-Ashtar, Iran
S. M. Mousavi
Department of Electroceramics and Electrical Engineering, University of Malek-Ashtar, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :