MAGNESIUM BASED NANO COMPOSITE, INVESTIGATION OF PROCESS PARAMETERS ON THE MECHANICAL PROPERTIES OF THE AZ91/SIO2 COMPOSITE
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,224
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IMES06_452
تاریخ نمایه سازی: 8 بهمن 1391
چکیده مقاله:
Process parameters are one of the major factors in friction stir processing. Therefore the effect of these parameters was investigated in fabrication of AZ91/SiO2 composite. By keeping the rotational speed in1250 rpm, three traverse speeds (20, 40, 63 mm/min) were selected on 8 mm thick AZ91 magnesium alloy. The prepared grove contained 8% volume fraction Nano SiO2 powder. Microstructural properties were investigated by means of optical microscopy (OM) and scanning electron microscopy (SEM). The results show that by increasing the traverse speed, grain size decreases significantly and hardness rises.Maximum amount of hardness achieved in this experiment was 92 HV and the minimum grain size was 8 microns. Also tensile properties of the specimen produced in one, two and three passes were investigated by standard tensile test. The results show that FSP improves the tensile characteristics of the as cast AZ91 alloy significantly
کلیدواژه ها:
نویسندگان
D KHAYYAMIN
Department of Mechanical Engineering, Tabriz University
A MOSTAFAPOUR
Department of Mechanical Engineering, Tabriz University,
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :