Microstructural evolution of ultrafine-grained austenite fabricated by severe plastic deformation in Fe-Ni-C alloy
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,159
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IMES06_356
تاریخ نمایه سازی: 8 بهمن 1391
چکیده مقاله:
In this paper, microstructure and mechanical properties of austenite in Fe-24Ni-0.3C alloy subjected to accumulative roll bonding (ARB) process and subsequent annealing were studied. After 6 cycles of ARB process, elongated ultrafine-grained (UFG) austenite with mean grain size of 300 nm was obtained. Annealing treatment of 6-cycle ARB processed austenite at temperatures from 773 to 873 K resulted in formation of partly and fully recrystallized austenites with mean grain sizes between 750 nm to 2.5 μm.
کلیدواژه ها:
Ultrafine-grains ، Transformation induced plasticity (TRIP) ، Accumulative roll bonding (ARB) ، Microstructure
نویسندگان
Hamidreza Jafarian
School of Metallurgy and Materials Engineering, Iran University of Science and Technology (IUST),
Ehsan Borhani
Department of Nano technology, Nano-Materials Science and Engineering group, Semnan University,
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :