Correcting the stress-strain curve in hot compression test using finite element analysis and Taguchi method
سال انتشار: 1390
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 99
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ISSIRAN-8-1_005
تاریخ نمایه سازی: 6 آبان 1402
چکیده مقاله:
In the hot compression test friction has a detrimental influence on the flow stress through the process and therefore, correcting the deformation curve for real behavior is very important for both researchers and engineers. In this study, a series of compression tests were simulated using Abaqus software. In this study, it has been employed the Taguchi method to design experiments by the factors of material flow curve and the friction coefficient. The compression test was simulated up to the axial strain of ۱ and then the deformation curve was extracted from the force-displacement plot of the strokes. Deviations between the deformation curves and the material flow curves were analyzed using Taguchi approach. Furthermore, the final shape of samples and friction coefficients were logically correlated. As a result, a new method was proposed in order to evaluate the material flow curve, based on the experimental data by the mathematical data manipulation.
کلیدواژه ها:
نویسندگان
J. Rasti
Department of Materials Engineering, Isfahan University of Technology, ۸۴۱۵۶-۸۳۱۱۱ Isfahan, Iran
A. Najafizadeh
Department of Materials Engineering, Isfahan University of Technology, ۸۴۱۵۶-۸۳۱۱۱ Isfahan, Iran
M. Meratian
Department of Materials Engineering, Isfahan University of Technology, ۸۴۱۵۶-۸۳۱۱۱ Isfahan, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :