Determination of drainage area and shape factor of vertical wells in naturally fracture reservoir with help welltesting and developed IPR curve
محل انتشار: چهاردهمین کنگره ملی مهندسی شیمی ایران
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,996
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NICEC14_779
تاریخ نمایه سازی: 3 آذر 1391
چکیده مقاله:
Shape Factor and drainage area in hydrocarbon reservoir are of the necessary and influencing factors on evaluation and optimization of drilling operation in oilfields. There are numerous methods to calculate the reservoir average pressure in conventional and sandstone reservoirs in that shape and drainage area of thereservoir are of important variables. On the other hand, these relations especially set for sandstone reservoirs and have limited usage in natural fracture reservoirs.This thesis presents a method to calculate shape and drainage area of wells in carbonated and natural fracture fields in all pressure and fluidity conditions. To doso, results of well testing are used both for development of inflow performancecurve and finding the drainage area. To make sure about the validity and preciseness of this method, it was investigated against the data from a well in a natural fracture field and the resultswere compared with those of other methods. Results indicated that the new method can provide us with more precise and correct answers for the shape of thewell in natural fracture reservoirs. The suggested method in this thesis needs production test data that has beenoptimized by well testing data for natural fracture reservoirs. Additionally, this method used draw down test and Tiab direct technique which is related to Walland Root solution. What's more, this method is reliable for all vertical wells in natural fracture reservoirs with accessible production test data and well testing
کلیدواژه ها:
NFR: natural fracture reservoir ، MBH method: Matthews ، C.S ، Browns F and Hazerbroek method ، A: drainage area ، CA: shape factor
نویسندگان
Mohammad. Sadehgi
Sience and research university of tehran
S. R. Shadizadeh
Petroleum university of technology
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :