IN SITU FABRICATION OF Al ۲۰۲۴-Mg۲Si COMPOSITE BY SPARK PLASMA SINTERING OF REACTIVE MECHANICALLY ALLOYED POWDER
محل انتشار: مجله علم مواد و مهندسی ایران، دوره: 13، شماره: 2
سال انتشار: 1395
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 119
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJMSEI-13-2_002
تاریخ نمایه سازی: 26 مرداد 1402
چکیده مقاله:
In situ Al۲۰۲۴- Mg۲Si composite was fabricated by spark plasma sintering (SPS) of reactive powder. Reactive powder was obtained from mechanical alloying (MA) of elemental powders. Clad layers of in situ composite were fabricated on Al substrates by spark plasma sintering (SPS). Structural evolution during MA process and after SPS was investigated by X-ray diffractometery (XRD). Scanning electron microscopy (SEM) was utilized to study the microstructure of sintered samples. Hardness and tensile behavior of sintered samples were investigated. The results showed that SPS of mechanically alloyed unreacted powder can result in the in situ formation of Mg۲Si and Mg۲Al۳ within the Al matrix. SPSed clad layer showed a sound and clear interface to the Al substrate with a hardness of about ۱۴۰ HV. Sintered in situ composite exhibited a tensile strength of ۲۸۸ MPa.
کلیدواژه ها:
نویسندگان
Z. Sadeghian
Department of Materials Science and Engineering, Faculty of Engineering, Shahid Chamran University
R. Dezfulizadeh
Department of Materials Science and Engineering, Faculty of Engineering, Shahid Chamran University
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :