Improvement of Microencapsulated PCMs Charachteristic by Variation of Effective Curing Parameters

Microcapsules containing n-hexadecane (HD) as the core and melamine-formaldehyde (MF) prepolymer as the shell material were prepared via in-situ polymerization and some effective curing parameters such as pH, temperature and hardener type were invesigated as the affecting factors on the characteristics of the resulting microcapsules. The morphology and thermal properties of the microcapsules were studied using scanning electron microscopy (SEM) and differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA),respectively.The surface morphology of microcapsules showed that the prepared microcapsules at low temperature and high pH were mechanically unstable. From the DSC analysis, it was concluded that for all samples, encapsulation efficiencies of about 90-100% were obtained. It was shown by TGA that the sapmples prepared at 60 °C and pH of 5 had higher thermal stability

کلیدواژه ها:

Microcapsule ، Melamine-formaldehyde ، Thermal stability ، Phase change material