Reducing Diameter and Variability of Electrospun Poly(ε-caprolactone) Nanofibers Using Charged Additives
محل انتشار: چهاردهمین کنگره ملی مهندسی شیمی ایران
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,154
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NICEC14_604
تاریخ نمایه سازی: 3 آذر 1391
چکیده مقاله:
Electrospun poly(ε-caprolactone) (PCL) nanofibers usually exhibit a wide range of fiber diameters in a typical preparation. Chloroform/ methanol binary solvent system was optimized to obtain thelowest fiber diameter distribution (FDD). However, the optimized composition of chloroform: methanol (3:1 v/v) led to micro scale fibers. Morever, lowering the solution concentration as a typical approach for decreasing the fiber diameter, resulted in a wide FDD. One way to alleviate this problem is to use Charged additives to further tailor the conductivity of the solution. Hence,additives including ammonium bromide salt and ionic surfactants were added to the optimized solvent system as an alternative for reducing the fiber diameter along with retaining the narrow FDD. It was found that only the cationic surfactant, dodecyl trimethyl ammonium bromide (DTAB), reduced both diameter and variability of electrospun PCL nanofibers
کلیدواژه ها:
نویسندگان
Mohammad Hossein Ghanian
Biomaterials Department, Iran Polymer and Petrochemical Institute, Tehran, Iran
Morteza Ehsani
Department of Polymer Processing, Iran Polymer and Petrochemical Institute, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :