Preparation study of PU Nanocomposites via two different Methods

سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 810

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICNN02_483

تاریخ نمایه سازی: 27 شهریور 1391

چکیده مقاله:

Thermoplastic polyurethanes Elastomer (TPUE) are high performance elastomers with applications as coating, fibers, films, footwear, wire and flexible tubing [1]. TPUEs are multi-phase segmented polymers that exhibit a two-phase microstructure, which arises from the incompatibility between the soft and the hard segments [2]. Resulting from their specific micro-phase structure, polyurethane elastomers offer very good elasticity with reasonably high mechanical strength and abrasion resistance at the same time, and also controllable hardness. Unfortunately, there are two inhibiting factors for applicability of some polyurethane: their limited stability at temperatures above 90 ºC, and their flammability [3]. One of the important methods for improvement of thermal properties of polyurethane elastomers involved the incorporation of inorganic particles such as nanoclay to PU matrix. When this route leads to nanocomposite structure, the product exhibits remarkable improvements in mechanical, thermal and barrier properties. This improvement in properties is attributed to the strong interfacial interaction between the matrix and layered silicate of clay, changes in polymer molecular dynamic and crystallinity. Some works have been carried out to study of nanoclay content effect, morphology, properties and interactions between clay and isocyanate group in PU nanocomposite [4-5].In this work, polyurethane nanocomposites were prepared via two different processes of in situ polymerization and melt intercalation. Polyurethane, nanoclay type and quantity were kept constant, to investigate the effect of preparation process. The physical and mechanical properties of prepared polyurethane nanocomposites were measured and reported.

نویسندگان

M Barmar

Department of Polyurethane, fibers and nanopolymers, Iran polymer and Petrochemical institutes

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • S. Yamasaki, D. Nishiguchi, K. Kojio, M. Furukawa, Polymer, 48, ...
  • J. Vega-Baudrit, M. Sibaj a-Ballestero, P. Vazquez, R. Torregros a-Macia, ...
  • P. Krol, Progress in Materials Science, 52, 915-1015, 2007. ...
  • B. Finnigan, D. Martin, P. Halley, R. Truss, K. Campbell, ...
  • S. Solarski, S. Benali, M. Rochery, E. Devaux, M. Alexandre, ...
  • نمایش کامل مراجع