Manufacture and characterization of sandwiched polymer nanocomposite for using in bipolar plate of PEMFC
محل انتشار: دومین کنفرانس ملی هیدروژن و پیل سوختی
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,476
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
H2FC02_111
تاریخ نمایه سازی: 27 شهریور 1391
چکیده مقاله:
The aim of this article is the manufacture of polymer based composite for using in bipolar plate (BP) of polymer exchange fuel cell (PEMFC). In this regard, some single-filler and double-filler and triple-filler composites are manufactured by using phenolic resin as polymer (P) and graphite (G), carbon fiber (CF) and expanded graphite (EG) as fillers. The electrical conductivity (EC), flexural strength (FS), toughness, porosity and gas permission of composites are determined. Characterization is performed by SEM and optic microscope. The final composite is a triple-filler composite sandwiched by a layer of CF cloth in the middle. Determining electrical and thermal conductivity, mechanical properties and gas permeation of this composite show that the properties of this nanocomposite is reached to DOE and these properties are better than graphite or metallic bipolar plates, therefore it can be introduced as a suitable candidate for bipolar plates.
کلیدواژه ها:
نویسندگان
Reza Taherian
Ph.D candidate, Material research center, Isfahan,
Mohammad Jaffar Hadianfard
Professor, Material engineering faculty, Shiraz university
Ahmad Nozad Golikand
Associate professor, Material research center, Isfahan,
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :