The Effects of Aging Treatment Parameters on Microstructure and Hardness of Aluminium Bronze Alloy
محل انتشار: سومین کنفرانس بین المللی عملیات حرارتی مواد
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,054
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICMH03_047
تاریخ نمایه سازی: 21 تیر 1391
چکیده مقاله:
In the present study, the effects of aging treatment parameters on microstructure and hardness of aluminium bronze C95500 was investigated. Different parameters in aging treatment were aging temperature, aging time and quenching environment. Microstructure and hardness were examined by optical microscopy, scanning electron microscopy (SEM) and Vickers hardness tester respectively. Different phases were detected. The experimental results demonstrated that after quenching, all β phase transforms to martensite phase βˊ and after aging, α and κ phase were precipitated from matrix (βˊ), moreover, the dispersed κ phase are the dominant factor that improves the hardness of alloy after a solution at 1000 ˚C for 1 h followed by quenching at saltwater and aging at 300 ˚C for 2 h. With regard to quenching environment, saltwater leads to highest hardness both in as-quenched and aged samples
کلیدواژه ها:
نویسندگان
M. Mokhtari Shirazabad
۳Department of material engineering, Ferdowsi University of Mashhad.
A. Karimi
Department of material engineering, Iran University of Science and Engineering.
A. Babakhani
Department of material engineering, Ferdowsi University of Mashhad
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :