Numerical Analysis of Single Point Incremental Forming of AA۵۷۵۴-O Sheet Using Combined Isotropic/Kinematic Hardening Model
سال انتشار: 1401
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 172
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME30_285
تاریخ نمایه سازی: 29 خرداد 1401
چکیده مقاله:
Single point incremental forming (SPIF) is a flexible process for manufacturing various intricate sheet metal components. The improved formability in this process is one of its distinctive features that has attracted the researchers' interest. This paper presents an investigation of the process through a numerical scheme that reveals the proper hardening behavior of AA۵۷۵۴-O sheet metal during the deformation. So, an elasto-plastic constitutive model with isotropic hardening and combined isotropic/kinematic hardening model are adopted to simulate the SPIF process. Also, to predict the fracture behavior of sheet metal, Brozzo phenomenological model is used. A series of uniaxial tensile tests were performed to extract AA۵۷۵۴-O sheet metal constants, and also SPIF experiments were performed to investigate the process. A user-defined material subroutine (VUMAT) is employed to implement the material behavior of the sheet metal. Numerical and experimental results in terms of deformed shape and thickness evolution are compared to present the efficiency of the finite element model and interpret the process. Results show that combined isotropic/kinematic hardening predicts better the deformation of sheet metal during the SPIF process and give a more exact prediction of the shape of the deformed geometry. In addition, the strain distribution of the deformed geometry in the forming limit diagram space is plotted, which indicates the higher forming strains of the SPIF process.
کلیدواژه ها:
نویسندگان
Ali Zahedi
Assistant professor, University of Mohaghegh Ardabili, Ardabil;