Morphological Characterization of Combustion Deposited Diamond Crystals and Films
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 15، شماره: 8
سال انتشار: 1381
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 226
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-15-8_007
تاریخ نمایه سازی: 19 اسفند 1400
چکیده مقاله:
Single crystals and polycrystalline diamond films of several thicknesses were deposited using oxygen/acetylene combustion flame technique. The substrate used was pure polycrystalline molybdenum subjected to mechanical polishing. Quality and microstructural characteristic of diamond produced were investigated using X-Ray diffraction, Raman Spectroscopy, Scanning and Transmission Electron Microscopy. Results obtained revealed that a good quality single and polycrystalline diamond could be produced. However, a combination of various defects such as twins, dislocations and stacking faults are always present.
کلیدواژه ها:
morphology ، Diamond ، Like Carbon (DLC) ، Combustion Flame Technique ، Scanning electron microscopy (SEM) ، Transmission Electron Microscopy (TEM) ، X ، Ray Diffraction (XRD) ، Raman spectroscopy
نویسندگان
H. R. Habibi Bajguirani
, National Iranian Steel Company (NISCO)
M. A. Golozar
Materials Engineering, Isfahan University of Technology