The Effects of ZrO۲ or Tic on the Performance of the Alumina-Based Ceramic Cutting Tools
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 5، شماره: 3
سال انتشار: 1371
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 136
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-5-3_005
تاریخ نمایه سازی: 19 اسفند 1400
چکیده مقاله:
Two types of alumina-based cutting tools with compositions of ۹۰ vol.% Al۲O۳+۱۰ vol.% ZrO۲ and ۸۰ vol.% A۱۲O۳+۲۰ vol.% TiC are produced by isostatic pressing and sintering technique. The effects of these additives on the mechanical properties and cutting performance of these materials are investigated. The tool life in both materials is examined under identical conditions on cutting a grey cast Iron of grade ۱۴. At a cutting speed of ۵۵۰ m/min., a feed rate of ۰.۲۵ mm/rev., and a cutting depth of ۲ mm, the material containing TiC with an optimal tool life of ۲۷ minutes, is found to be superior to the ZrO۲ containing material which had an optimal tool life of ۲۵ minutes. The possible role of these additives on the performance of these materials are discussed.
نویسندگان
A. Kianvash
Department of Materials Engineering, University of Tabriz