FEM Updating for Offshore Jacket Structures Using Measured Incomplete Modal Data
محل انتشار: مجله بین المللی فناوری دریایی، دوره: 5، شماره: 1
سال انتشار: 1394
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 130
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJMTE-5-1_001
تاریخ نمایه سازی: 23 بهمن 1400
چکیده مقاله:
Marine industry requires continued development of new technologies in order to produce oil. An essential requirement in design is to be able to compare experimental data from prototype structures with predicted information from a corresponding analytical finite element model. In this study, structural model updating may be defined as the fit of an existing analytical model in the light of measured vibration test. After fitting, the updated model is expected to represent the dynamic behavior of the jacket structure more precisely. In this way, current article presents a direct based updating study of a reduced scale four-story spatial frame jacket structure fabricated and tested at mechanical system and signal processing laboratory. Also, an efficient model updating process is presented with limited modal data, which uses modal data in order to improve the correlation between the experimental and analytical models.
The proposed technique is computationally efficient since it does not require iterations. It updates the mass and stiffness matrix such that they are compatible with the modal data of the observed modes.
کلیدواژه ها:
نویسندگان
Farhad Hosseinlou
University of Tabriz
Alireza Mojtahedi
University of Tabriz
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :