STATIC AND DYNAMIC RESPONSE OF CARBON NANOTUBE-BASED NANOTWEEZERS
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 24، شماره: 5
سال انتشار: 1390
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 182
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-24-5_006
تاریخ نمایه سازی: 17 بهمن 1400
چکیده مقاله:
In this paper static and dynamic response of nanotweezers composed of two carbon nanotube (CNT) arms are investigated. Taking into account a continuum model and considering the electrostatic actuation as well as the presence of the van der Waals forces, the static nonlinear equations are solved by a step by step linearization and Galerkin projection method. Simulating the closing dynamics of a specific nanotweezer, the effective diameters of its nanotube cantilevers are specified and compared with existing experimental data. Then by imposing a step DC voltage and taking into account the inertia effects, dynamic responses and pull-in conditions of nanotweezers are studied. In the analyses, the effects of various parameters such as initial gap, nanotube length and diameter on the pull-in conditions are investigated. Effects of damping and asymmetric stiffness's of the arms on the pull-in voltages of a nanotweezer are also reported. Comparing the results with the published experimental data shows that the use of continuum model and employing the Galerkin based step by step linearization method (SSLM) could effectively simulate the response of nanotweezers.
کلیدواژه ها:
نویسندگان
vahid Gharebagh
Mechanical Engineering, Urmia University
Ghader rezazadeh
mechanical engineering, Urmia university
naser sharafkhani
Mechanical Engineering , Tabriz university
rasoul shabani
mechanical engineering, Urmia university