Study of Pulsatile Flow in Common Carotid Artery with Different Stenosis' Shapes within Various Wall Conditions
سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 197
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JAFM-12-1_005
تاریخ نمایه سازی: 15 دی 1400
چکیده مقاله:
Recently, due to the development of CFD techniques, many attempts have been made to simulate the initiation and progression of atherosclerosis. In recent works, various curves have been suggested to model the stenosis shape. However, little effort has been made to study the importance of the stenosis shape on the flow behavior. In this study, four types of stenosis with asteroid, Gaussian, semi-circle, and sinusoidal shapes were simulated in order to study the effect of the stenosis shape on flow behavior and diagnosis parameters. Shear stress and flow behavior were investigated in the common carotid artery with stenosis severities of ۳۰%, ۴۰%, and ۵۰%. Flow was assumed to be unsteady and the inlet to be a pulsatile flow. Two cases of Newtonian and non-Newtonian fluids were simulated. The no-slip and permeable boundary conditions were imposed on the outer walls. To examine the effect of the location of stenosis, modeling was conducted at various locations. The results showed that the maximum shear stress occurs in the Gaussian stenosis at the opening of the stenosis. Semi-circle, sinus, and asteroid shapes had the next largest shear stress values. Additionally, the location of stenosis had a negligible effect on the maximum shear stress. However, flow resistance increased with increasing the stenosis’s distance from the beginning of the artery. This study indicates that stenosis shape highly affects the flow characteristics, and stenosis severity is not the only parameter that is important. Hence, the stenosis shape should be considered when simulating atherosclerosis.
کلیدواژه ها:
نویسندگان
P. Bayat
Department of Mechanical Engineering, York University, Toronto, M۳J۱P۳, Canada
M. R. Tavakoli
Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, ۸۴۱۵۶-۸۳۱۱۱, Iran