Effect of single walled carbon nanotube on mechanical and morphological properties of dynamically vulcanized thermoplastic elastomer based on NBR/PVC
محل انتشار: کنفرانس بین المللی فرآورش پلیمرها
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,595
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
PPSRC2011_171
تاریخ نمایه سازی: 30 بهمن 1390
چکیده مقاله:
Dynamically vulcanized thermoplastic elastomers based on NBR/PVC with single walled carbon -nanotube were prepared using a Brabender internal mixer. The effects of SWNT concentration were investigated on mechanical and morphological properties of dynamically vulcanized thermoplastic elastomer based on NBR/PVC. The SWNT content varied from 0, 0.5, 1 and 1.5 phr of NBR/PVC composites. The results of mechanical tests revealed that peak stress, modulus, elongation at break and hardness of NBR/PVC increased with increasing of SWNT concentration. The morphology of blends was examined with transmission electron microscopy (TEM) and scanning electron microscopy (SEM) of extracted surfaces of the blends. The results of TEM showed that SWNTs were homogeneously dispersed in NBR/PVC blends processed by dynamically vulcanized
کلیدواژه ها:
نویسندگان
a Hajibaba
Iran Polymer and Petrochemical Institute, P.O. Box: ۱۴۹۶۵-۱۱۵, Tehran, Iran