Optimization of parameters of Anti lock Braking System for use in deep drawing
سال انتشار: 1392
نوع سند: مقاله ژورنالی
زبان: فارسی
مشاهده: 174
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_MPMPJ-2-1_004
تاریخ نمایه سازی: 24 مهر 1400
چکیده مقاله:
A new method for increasing LDR in deep drawing is application of anti-lock braking system (ABS) on blank holder. In this method, instead of applying a constant force on blank and control the metal flow, the ABS system holds and releases the blank several times (۲۰ to ۵۰ times) which results increasing LDR. This study investigates the effect of different parameters of ABS on improving the conditions of drawing and increasing LDR The results of steel sheet (ST۱۴) with ۰.۵ mm thickness shows that for each velocity of punch there is an optimum frequency for ABS.The best condition for applying force of blank holder is create a constant gap and a variable gap with ABS system.
کلیدواژه ها:
نویسندگان
Ali Abedi
MSC Graduated, Shahid Rajayi Institute
Bozarjomehr Ghasemi
Associate Prof. of Islamic Azad University Najafabad Branch
- Moradi
Assistant Prof. of Isfahan University of Technology