Compact Reformer CFD Modeling for Hydrogen Production from Natural Gas
محل انتشار: هفتمین کنفرانس بین المللی فناوری و مدیریت انرژی
سال انتشار: 1400
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 213
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IEAC07_168
تاریخ نمایه سازی: 6 مهر 1400
چکیده مقاله:
Hydrogen production for use in automobiles has great attention for reducing the air pollution of the large cities. Therefore, hydrogen needs to be produced in a compact reformer near the hydrogen fuel station. Using steam reforming of natural gas (methane) for hydrogen production that mainly containsmethane need heat because of the endothermic nature of methane steam reforming (MSR) reaction and this heat can be provided using natural combustion. CFD models for compact reformers were developed for heat integration of combustion and MSR for hydrogen stations in novel configurations to increase thermal efficiency. In this review, recent progress in the CFD modeling of methane steam reforming (MSR) in compact reformers were summarized. Different configurations for compact reformers were analyzed with CFD modeling to enhance the performance of the reformers in the viewpoint of hydrogen yield and energy efficiency. These novel geometry and heat integration ideas were discussed briefly in this research
کلیدواژه ها:
Compact Steam Reformer ، Hydrogen Production ، Computational Fluid Dynamic (CFD) ، Natural Gas ، Methane Steam Reforming (MSR).
نویسندگان
Ali Fazeli
College of Engineering, University of Tehran, Tehran, Iran