Finite Element Model Updating of Welded Plates
محل انتشار: بیست و نهمین همایش سالانه بین المللی انجمن مهندسان مکانیک ایران و هشتمین همایش صنعت نیروگاه های حرارتی
سال انتشار: 1400
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 169
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME29_217
تاریخ نمایه سازی: 13 تیر 1400
چکیده مقاله:
This research deals with finite element (FE) model updating of two plates connected by a butt-welded joint using experimental natural frequencies and surrogate modeling. Since there are some uncertainties in the structure especially about the welded joint, sensitivity analysis, and FE model updating are performed to investigate the effects of uncertain parameters on the modal parameters. The results show that while geometric and material properties of the welded joint do not significantly affect the natural frequencies, the geometric parameters of the weld bead influence the mode shapes. Therefore, similar material properties for the plates and the welded joint is utilized in the FE model updating procedure using the experimental natural frequencies
کلیدواژه ها:
نویسندگان
Laleh Fatahi
Assistant Professor, Department of Mechanical Engineering, Shahid Chamran University of Ahvaz, Ahvaz