Productivity Improvement of BOB T-shirt through Line Balancing Using Control Limit analysis and discrete event simulation (Case study: - MAA Garment and Textile Factory)

سال انتشار: 1400
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 261

فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JOIE-14-2_016

تاریخ نمایه سازی: 17 فروردین 1400

چکیده مقاله:

 This study deals with line balancing of BOB T-shirt model with the help of control limit analysis and discrete event simulation of the assembly lines. In this study control limit analysis is used to measure the performance of the assembly line and used to show the bottleneck operations of the assembly line and line balancing technique improves the productivity of the sewing line of the model. BOB T-shirt model has 16 main operations and each operation’s time is analyzed as standard minute value (SMV). The main bottleneck operations are analyzed using the control limit analysis and simulation modeling. Based on the SMV of each operation, those operations which are out of lower control limit and upper control limit is called us bottlenecks of the sewing lines of the garment section and the 1st bottleneck operation is tread trimming operation. When we apply control limit analysis and discrete event simulation technique for the line balancing; the daily output has been increased from 1032 pieces to 1289 pieces. And labor productivity and machine productivity are increased from 46.9 and 54.32 to 58.59 and 71.61 respectively. And then finally, the profit that the line generated also increased from 22704 to 28358birr.

نویسندگان

aregawi yemane

industrial engineering, school of mechanical and industrial engineering , Ethiopian institute of technology-Mekelle, Mekelle University ,Mekelle , Ethiopia

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • aregawi, y., misgina, teklewold, & gebremedhin. (2020). Productivity Improvement through ...
  • aregawi, y., serajul, h., & ivan. (2017). Bottleneck Identification Using ...
  • ashkan, h., hamid, k., & hesam, r. (2014). line balancing ...
  • asmelash, m. (2008). modeling and simulation analysis of manufacturing systems ...
  • azizul, m. a. (2007). line balancing and optimization for single ...
  • Babu. (2011). industrial engineering in apparel production. international journal of ...
  • Bryton. (1954). Balancing of a continues production line M.S Thesis. ...
  • gorema , t., & mulugeta, n. (2014). Modeling and performance ...
  • Hailemariam, d. (2009). mixed model assembly line balancing using simulation ...
  • hapaz, & hazmil, b. (2008). productivity improvement through line balancing. ...
  • hapazl, H. b. (2008). productivity improvement through line balancing. ...
  • hasanshumon, M., zaman, k. u., & azizur, r. (2010). productivity ...
  • Islam, M. .., md.tanjimhossain, jalil, M. A., & Khalil, E. ...
  • lamming, Steve, b., & Richard. (2014). manual for improving productivity ...
  • Matebu, a. (2006). Model development of quality management system for ...
  • Mominul, i., mehidi, h. s., & h.m, m. (2014). an ...
  • Roy, R. (2005). Modern approach to operations management,5th edition. new ...
  • Suresh, S. K. (2008). production and operation management 2nd edition. ...
  • yemane, A., serajul, h., & ivan, s. (2017). Optimal Layout ...
  • Zandin, K. (2001). Maynard’s Industrial Engineering Handbook (5th Edition). McGraw-Hill. ...
  • نمایش کامل مراجع