Theory of “Friction-Transfer” test to measure strength and adhesion between layers
محل انتشار: سومین کنفرانس محیط زیست، عمران ،معماری و شهرسازی
سال انتشار: 1399
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 239
فایل این مقاله در 5 صفحه با فرمت PDF و WORD قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CECAUD03_010
تاریخ نمایه سازی: 14 اسفند 1399
چکیده مقاله:
Nowadays, there are various tests to measure the compressive strength of repair mortars and the adhesion strength between mortars and substrate. By using in-site tests, it can be used to evaluate the compressive strength of cementitious materials and adhesion between repair layers and concrete substrate, at different times and with different conditions. In this paper, the theory of in-situ and semi-destructive friction transfer tests is presented. In the friction transfer test, due to the fact that all equipment is mechanical, so it can be applied in any temperature and humidity conditions, even under water. In this test, using the material strength relationships, the anchor applied to the material can be converted to a stress unit.
کلیدواژه ها:
نویسندگان
Ali Saberi Varzaneh
Ph.D Student, Department of Civil Engineering, Imam Khomeini International University, Qazvin, Iran
Mahmood Naderi
Professor, Department of Civil Engineering, Imam Khomeini International University, Qazvin, Iran