NUMERICAL EVALUATION OF MULTI LEVEL YIELDING RING DAMPER
سال انتشار: 1398
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 188
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
این مقاله در بخشهای موضوعی زیر دسته بندی شده است:
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
SEE08_448
تاریخ نمایه سازی: 23 آبان 1399
چکیده مقاله:
In this paper, a new type of dual-performance passive dissipating devices called TRYD (three ring yielding damper) is introduced as alternatives to the available yielding ring dampers (Andalib et al., 2018). Modified types of the conventional ring dampers are detailed and designed to absorb and dissipate seismic input energy at different levels of ground motion intensities. Proposed system is composed of a main fuse to dissipate energy at high-level drift demands occurred in severe earthquakes and an auxiliary fuse to control the responses at lower drift demands normally occurred in moderate earthquakes. The hybrid damper is basically a displacement-dependent device which dissipates seismic energy by yielding of outer and inner rings. The yielding of outer ring occurs at small displacement, which makes it effective in resisting small earthquakes. The inner rings (main fuse) remain elastic during small earthquakes and are activated at major earthquakes. Eight finite element model with different thickness and diameters of inner and outer pipe (as detailed in Table 1) have been modelled and analysed under cyclic loading by ANSYS software. Schematic view of modelled damper is shown inFigure 1. Loading protocol was selected based on SAC loading protocol (SAC, 1997) and force-displacement curve for all models have been extracted. Figure 2 illustrate the force-displacement characteristics for model 1. As seen in this figure two level of force increasing have been occurred when gap displacement passed. The value of force is about 35 kN before reaching that gap displacement while in displacement beyond the gap distances and in final displacement, 165 kN achieved.
کلیدواژه ها:
نویسندگان
Hossein TIZHOOSH
M.Sc. Student, Seraj Higher Education Institute, Tabriz, Iran
Elham MOADDAB
Assistant Professor, Seraj Higher Education Institute, Tabriz, Iran
Gholamreza BAGHBAN GOLPASAND
Assistant Professor, Seraj Higher Education Institute, Tabriz, Iran