Geothermal Wells Drilling
سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,857
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IAUOOIL01_023
تاریخ نمایه سازی: 21 آبان 1389
چکیده مقاله:
The drilling process complex as it may be rotate about breaking the ground and lifting the rock cuttings from the resulting hole. The ultimate geothermal drilling objective is to access the resource for exploitation. However, during resource development and exploitation, drilling is used to confirm existence of the resource, obtain data for resource assessment, provide adequate steam fuel for the power plant and resolve well production complications. Tri-cone tungsten carbide insert bits are very often used in geothermal drilling. Mobile and conventional land rigs are predominantly used in the geothermal drilling industry. The rigs are selected to technically fit the job at the lowest cost possible. The wells are made useful by casing them. Several casing string are used for each well. They are cemented to bond them to formation. Large productioncasing of 13 3/8 casing is increasing becoming common where large well outputs are encountered and directional drilling is being employed to target major faults that transmit fluids
کلیدواژه ها:
نویسندگان
Mahdi Bakhtbidar
Young Research Club, Omidieh Branch
Mehdi Ali Mohammadi
Islamic Azad University, Omidieh Branch
Mohsen Ghorbankhani
Young Research Club, Omidieh Branch
Mohammad Reza Kazemi Asfeh
Islamic Azad University Omidieh Branch
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :